Five ways to keep the soldering tip of the USB automatic soldering machine flowing smoothly
First, when automatic soldering, the selection of tin wire should be appropriate. When soldering with an automatic soldering machine, the soldering iron head should always maintain an appropriate amount of tin, and the tin content in the tin wire should be appropriate. When selecting the tin wire, try to choose a thicker solder wire, so that the soldering iron tip has a sufficient amount of tin, so that it will not be exposed to the air and the soldering iron tip will oxidize faster.
Second, the soldering iron head should be kept in a clean state. When using an automatic soldering machine for soldering, the oxide on the soldering iron head must be cleaned before soldering, so that the solder can have a good flowing state during soldering. At the same time, after the soldering is completed, a new layer of tin should be added to the soldering iron tip so that the soldering iron tip will not oxidize too quickly. When cleaning the soldering iron head, you can use a wet special cleaning sponge to wipe off the flux residues and oxides on the soldering iron head, or use a razor blade to scrape these off and start soldering.
Third, the surface of the soldering iron head is often tinned to increase its durability.
Especially when the automatic soldering machine is not in use, it is often necessary to apply a layer of tin on it, which can greatly reduce the chance of oxidation of the soldering iron tip and make the soldering iron tip more durable.
Fourth, the oxide of the soldering iron head should be cleaned in time. When automatic soldering is performed, if there is a black oxide in the tin plating layer of the soldering iron head, it should be cleaned in time. It is possible to use sponge cleaning and blade cleaning to ensure good thermal conductivity. And solder flow.
Fifth, the selection of the soldering iron head should be appropriate. When automatic soldering, the model and selection of the soldering iron head must be appropriate. The incorrect selection of the soldering iron tip will not only affect the efficiency of the automatic soldering machine, but also the quality of the solder will be greatly reduced. At the same time, the thermal capacity of different types of soldering iron heads is also different. The larger the soldering iron head, the larger the thermal capacity. The principle of selecting a soldering iron head is based on the fact that the soldering iron head does not affect adjacent components, and then the geometric size that can fully contact the solder joints shall prevail. Only in this way can it be handy when soldering. http://hfkjbxg.icu/
Dongguan Chuangxiao Automation Technology Co., Ltd.
Soldering machine_Automatic soldering machine_Automatic soldering machine_Automatic soldering machine manufacturer_Non-standard automatic soldering machine_Online automatic soldering machine_Dongguan Chuangxiao Automation Technology Co., Ltd
Dongguan Chuangxiao Automation Technology Co., Ltd. © All rights reserved
Phone: 0769-85825590 E-mail: firstname.lastname@example.org
Address: 2nd Floor, Building B, Dinghao High-tech Industrial Park, No.29 Baohong Road, Baotun Community, Houjie Town, Dongguan City
Scan, watch on mobile