The power indicator of the multi-axis soldering machine is on, and the workpiece is not pressed and welded:
1. Check whether the foot pedal travel is in place and the foot switch is in good contact.
2. Check whether the pressure lever spring screws are adjusted properly.
Unexpected splashing during welding:
1. Check whether the electrode tip is seriously oxidized.
2. Check whether the welding workpiece is severely rusted and has poor contact.
3. Check whether the switch position is too high.
4. Check if the electrode pressure is too low and the welding procedure is correct.
Solder joints are severely indented and extruded:
1. Check if the current is too large.
2. Check whether the welding workpiece has unevenness.
3. Check whether the electrode pressure is too high, and the shape and cross section of the electrode tip are appropriate.
Information Summary: Multi-Axis Soldering Machine
Dongguan Chuangxiao Automation Technology Co., Ltd. © All rights reserved
Phone: 0769-85825590 E-mail: firstname.lastname@example.org
Address: 2nd Floor, Building B, Dinghao High-tech Industrial Park, No.29 Baohong Road, Baotun Community, Houjie Town, Dongguan City
Scan, watch on mobile