When welding with an automatic soldering machine , the voltage should be 5% less than the original voltage
3 issues that should be paid attention to in the process of automatic soldering machine
1, solder joints
During the operation of the automatic soldering machine, the solder joints should not be too saturated, because it is easy to cause mutual disconnection with the adjacent solder joints, but it should not be too economical, and prone to false soldering. The best use of automatic soldering machine is that the solder joint is located at the middle of three or four points. This solder joint is not saturated or tin-saving. The best contact between this solder joint and the component can also determine the solder joint. The circuit board came out neat and clear.
2. Iron tip
During the use of the automatic soldering machine , the tip of the soldering iron does not need to be cleaned on a sponge. As long as the tin on the tip of the soldering iron is placed in a tin collecting box, the temperature of the tip of the soldering iron can be maintained. If you do not use a soldering iron at all, after cleaning with a sponge, be sure to leave a certain amount of tin on the tip of the soldering iron, instead of placing it on the soldering iron rack after cleaning, and wait until the next time you use the soldering iron to clean it again.
When welding with an automatic soldering machine , the voltage should be 5% less than the original voltage, and the original voltage should not exceed the range of 10% of the power supply voltage. If the voltage is too low, it is easy to cause the phenomenon that the AC contactor is not properly sucked. At this time, the problem of power supply will also be involved, and the power supply problem must be solved before it can be used normally. http://hfkjbxg.icu/
Dongguan Chuangxiao Automation Technology Co., Ltd.
Soldering machine_Automatic soldering machine_Automatic soldering machine_Automatic soldering machine manufacturer_Non-standard automatic soldering machine_Online automatic soldering machine_Dongguan Chuangxiao Automation Technology Co., Ltd.
Dongguan Chuangxiao Automation Technology Co., Ltd. © All rights reserved
Phone: 0769-85825590 E-mail: firstname.lastname@example.org
Address: 2nd Floor, Building B, Dinghao High-tech Industrial Park, No.29 Baohong Road, Baotun Community, Houjie Town, Dongguan City
Scan, watch on mobile